compact and cost effective
ergonomic design and advanced functionality. the pistol-shaped nsg 435 simulator is designed to sit comfortably in the operator’s hand, with current operating conditions constantly displayed and clearly visible.
nsg 435’s microprocessor-based controller and multifunction keypad provide the operator with instant access to its comprehensive range of built-in functions. the lcd panel continuously displays the operating status and all user-selected test parameters.
nsg 435 has its own internal, battery operated high voltage generator. in addition to the pre-programmed, standard iec pulses, the user can create custom tests using single or repetitive discharges with selectable rates and manual or automatic polarity switching. an optional mains supply is available for extended test operation or for use when the battery is being charged.
carrying case with: electrostatic discharge simulator, battery pack, battery charger 100 to 240 vac, discharge network 150 pf/330 ω, air- and contact-discharge tips, grounding cable, tripod adapter, user manual
network 150 pf/330 ω as per iec/en 61000-4-2 (included)
air-discharge: 200 v to 16.5 kv (in 100 v steps)
ball and point as per iec
charging voltage measurement
kv, accuracy better than ±5% (stabilized); measurement and display of true air flashover voltage
indicated by an oval around the kv symbol, also acoustically in the 'single' operating mode (air-discharge only)
>5 s (charging voltage ... ±5%)
positive / negative / automatic change
single / repetitive =
lcd panel showing: charging voltage, discharge voltage, polarity, air-/contact-discharge, counter/preselect counter content, soft-key functions, battery monitor
nsg 435 with battery: 1.2 kg (2.6 lbs) approx.
operation: 5 to 40°c, 20 to 80 % r.h. (non-condensing), 68 to 106 kpa